50' ft Roll Drip Irrigation Line 1 4" Tubing Roll 6" Emitter Spacing .52 GPH Color Black .170 ID x 240 OD Will Work from Gravity Feed 50' Foot Roll - BNY2Z10K0
- Product Code: BNY2Z10K0
- Availability: In Stock
Available Options
This fits your .
The micro-line drip line with drip emitters is extruded micro tubing with flow labyrinth in-line emitters molded into the inside wall of the micro tubing. The inline drip emitter is built with a large filter along the cross section of the drip emitter to ensure that moving particles on the bottom of the micro tubing from entering the labyrinth water path, ensuring trouble free operation and long life. This tubing has emitters spaced 6" apart for your convenience. Nominal flow rates: .52 GPH (2 L/H) at 15 PSI (1 BAR) Dripper color code: blue Operating pressure: 10-25 PSI (.7-1.7 BAR) Dripline color code: black or brown Materials: Dow FINGERPRINT DFDA-7510 NT linear low-density polyethylene resin Size: 1/4" (6 mm) (.170" ID x .250" OD) (4.445 mm ID x 6.35 mm OD) Spacing: 6", 9" or 12" (15 cm, 23 cm, or 30 cm) Minimum bending radius: 1' (.3 m) Filter requirement: minimum of 150 mesh
50' ft Roll Drip Irrigation Line 1 4" Tubing Roll 6" Emitter Spacing .52 GPH Color Black .170 ID x 240 OD Will Work from Gravity Feed 50' Foot Roll - BNY2Z10K0
This fits your . Make sure this fits by entering your model number. Use 1/4" barb fittings Resistant to chemicals and fertilizers commonly used in landscaping Flexible tubing for easy installation Flow regulated, self flushing inline emitters deliver equal flow at a wide range of operating pressures The micro-line drip line with drip emitters is extruded micro tubing with flow labyrint..
This fits your . Make sure this fits by entering your model number. Same Day Shipping (M-F to 5PM EST) 100% Satisfaction Guarantee Excellent Customer Service Drip line is durable, economical and very easy to use. Our 1/4" drip line has 1/2 GPH emitters built right in. Available in varying emitter spacings to meet all your needs. This commercial grade, non pressure compensating poly drip ..
This fits your . Make sure this fits by entering your model number. This brown 1/2-in in-line drip tubing has a 1 GPH PC dripper molded into the 1/2-in tubing every 12 inches Use our 1/2-in poly tubing as a lead in water supply to this 1/2-in in-line drip tubing With 25 PSI of water pressure you can run up to 240-ft of this 1/2-in in-line drip tubing Use any of our 1/2-in poly locking-co..
This fits your . Make sure this fits by entering your model number. Inside Diameter (ID): .170 Inches Outside Diameter (OD): .250 Inches Emitter Spacing: 6 Inches Emitter Flow Rate (each): 0.5 Gallons Per Hour Color: Black 1/4" drip line is tubing with 1/2 GPH emitters embedded into the tubing at preset spacings of 6". This commercial grade poly drip line is made of the highest quali..
